Electrical Enclosure Polycarbonate 400H x 300W x 150D IP66

Electrical Enclosure Polycarbonate 400H x 300W x 150D IP66

At 400 × 300 × 150mm, this wall-mount enclosure suits distribution boards, control gear and metering equipment in corrosive, coastal and chemical environments where a lightweight, non-conductive housing is preferred over steel. Fully insulated high-impact polycarbonate construction rated to IP66 IK10.

Features and Specifications

Protection: IP66 IK10, NEMA 1, 4, 4X, 12, 13 (Independent accredited test laboratory).

Standards (& Conformities): IEC/EN 60529, IEC/EN 62208, IEC/EN 61439. Halogen-free (DIN/VDE 0472), UL94 5VA flammability, glow-wire tested to 960°C (IEC 60695).

Construction

A one-piece high-impact polycarbonate body and door resist corrosion, UV and chemical attack without the coating breakdown that limits painted steel, and stay fully insulated for safe use in wet or exposed installations. A machine-applied full-perimeter polyurethane seal and patented non-corrosive hinges complete the enclosure. Moulded in RAL7035 light grey throughout, so surface damage will not expose a different substrate colour.

What's Included: Enclosure body, door with seal, unperforated mounting plate, 2-point lock with door guide.

Note: Please choose product carefully. Product selection is the responsibility of the Purchaser. Refer to relevant Standards, project requirements and technical specifications to ensure that the product meets requirements. For more information on product selection, refer to this link.

Your product is covered by a 12 month Warranty or more if you opted for the extended warranty. Make sure you register your product.