Home » Weidmuller
Authorised Australian Distributor — Weidmüller

Connectivity that keeps Australian panels running.

Terminate, switch, power and network the entire control panel from one trusted system — fewer suppliers, cleaner builds, connections that stay put. PUSH IN and screw terminals, RIDERSERIES relays, PROtop DC power, industrial Ethernet, surge protection and marking, stocked in Australia through TROPAC.
Shop Weidmüller range TALK TO A PAC
0.13–95mm² Conductor cross-section
PUSH IN Tool-free termination
IEC 60947 UL 1059 · CSA listed
IP20–IP67 Across the range
Australian stock QLD · NSW · VIC warehouses
Terminate & switch Terminals, relays, power & Ethernet
PUSH IN connection Tool-free, vibration-proof termination
PAC support Terminal selection & panel schedules
Find your solution

What are you building?

Start with the job in the panel — we'll point you to the right Weidmüller range.

Application
Terminate field and panel wiring on the DIN rail
A-series PUSH IN and screw terminal blocks — feed-through, ground, multi-tier, fused and disconnect — from 0.13 mm² control signals to 95 mm² power, with shared accessories and marking.
DIN-Rail Terminal Blocks (A / Z)
View range →
Application
Isolate and switch signals between PLC and field
RIDERSERIES and TERMSERIES general-purpose, solid-state and safety relays and couplers — slim DIN-rail interfaces that protect I/O and switch loads cleanly.
Relays & Optocouplers
View Range →
Application
Power the panel with stable, protected 24 V DC
PROtop and PROeco DC power supplies, DC/DC converters and UPS systems — reserve power and dynamic boost to ride through inrush and brief mains dips.
Power Supplies & UPS
View Range →
Application
Network devices across the plant floor
Managed and unmanaged industrial Ethernet switches, PoE switches, fibre and serial converters and routers — built for the temperatures and EMC of the factory.
Industrial Ethernet
VIEW SERIES →
Application
Protect instrumentation, data and solar from surges
VARITECTOR surge protection devices for signal, control, AC, DC and solar PV circuits — pluggable modules that divert transients before they reach equipment.
Surge Protection
View Range →
Not sure?
I need help configuring a panel solution
Our PACs can advise on terminal selection, relay and power sizing, network architecture, surge protection and marking — from a single terminal to a full panel schedule.
Free selection support
Talk to a PAC →
Product range

The Weidmüller range.

Connectivity, switching, power and networking for the control panel, stocked in Australia. Terminal blocks, relays, power supplies, industrial Ethernet, surge protection and marking — one trusted system from terminal to network.

RIDER · TERMSERIES
Relays & Optocouplers

For isolating and switching signals between PLC and field — general-purpose, solid-state and safety relays, couplers and bases in slim DIN-rail housings.

General · solid-state · safety 6.4 mm slim PLC interface
Shop Relays →
PROtop · PROeco
Power Supplies & UPS

For powering the panel with stable 24 V DC — PROtop and PROeco regulated supplies, DC/DC converters and UPS, with reserve power and dynamic boost to ride out inrush loads.

DC power supplies UPS & DC/DC 24 V DC
Shop Power Supplies →
IE switches
Industrial Ethernet

For networking devices across the plant floor — managed and unmanaged switches, PoE switches, serial and fibre-optic converters, routers and media converters built for factory conditions.

Managed & unmanaged PoE Fibre & serial converters
Shop Ethernet →
VARITECTOR
Surge Protection

For protecting instrumentation, data, AC, DC and solar PV circuits from transients — VARITECTOR pluggable surge protection devices.

Instrumentation & control AC · DC · solar Pluggable modules
Shop Surge Protection →
PrintJet · MultiCard
Marking & Hand Tools

For marking and finishing the panel build — inkjet and thermal-transfer marking systems, MultiCard markers for terminals and conductors, plus stripping, crimping and testing hand tools.

Terminal & wire marking Inkjet & thermal Strip · crimp · test tools
Shop Marking & Tools →
DIN-Rail Terminal Blocks

One rail. Every connection, vibration-proof.

Weidmüller's A-series PUSH IN terminals terminate solid and ferruled conductors with a simple push — no tools, no torque checks, no re-tightening. The spring clamp holds tight through vibration and temperature cycling, so a panel built once stays connected for life.

From 0.13 mm² control signals to 95 mm² power, in feed-through, ground, multi-tier, fused and disconnect styles — all sharing common jumpers, accessories and marking. Screw connection is available across the same range where the spec calls for it.

PUSH IN connection

Tool-free spring clamp terminates solid or ferruled conductors in one push.

Vibration-proof

Gas-tight clamp holds through shock and thermal cycling — no re-torquing.

One system, 0.13–95 mm²

Control signals to power on a single rail with shared accessories.

Cross-connection & marking

Common jumpers and MultiCard markers across the whole A-series.

IEC 60947-7-1 / UL 1059

Certified for global industrial and export control panels.
Watch Weidmüller in action

Short videos from the Weidmüller range.

Tap a card to play. PUSH IN termination, relay swapping, power-supply setup and panel marking.

Loading... 4:47
Power Supplies
Uninterruptible DC-power supply for industrial applications
Loading... 1:53
Surge Protection
Lightning and surge protection
Loading... 3:39
Marking & Hand Tools
Handling - SFM MultiMark
Loading... 3:39
Industrial Ethernet
Switch configuration
Weidmüller

Build the panel around one system.

Weidmüller connectivity is stocked across Australia through TROPAC. Talk to a PAC for terminal selection, relay and power sizing, network architecture, surge protection or panel marking — or browse the full range online.

Shop all Weidmüller Talk to a PAC
Talk to a specialist

Need help specifying?

Send the team your application and a TROPAC Product Application Consultant will come back with the right Weidmüller product, stock position and account pricing — usually same business day.

  • Selection & cross-reference from your current part numbers
  • Live stock check across QLD, NSW & VIC
  • Trade-account & project pricing
Enquiry · Weidmüller
No obligation · usually same business day