Authorised Australian Distributor — Telergon

Transfer switches and switchgear, stocked in Australia.

Telergon low-voltage switching products — manual transfer, automatic transfer, switch-disconnectors, and changeover switches — available from local stock across Australia. Backed by TROPAC's technical support team.

Explore the Range FIND THE RIGHT SWITCH

40A–6300A Switch-disconnector range

Up to 50kA Icw (1s)

63–630A Automatic transfer

60947-3 IEC/EN certified

Local stock — AU QLD · NSW · VIC warehouses

Exclusive distributor Genuine product, OEM warranty

PAC support Selection, compliance & project help

IEC/EN 60947-3 Certified switch-disconnector performance

Find your solution

What do you need to switch?

Telergon covers the full range of low-voltage switching requirements. Start with your application and we'll point you to the right series.

Isolation

I need to isolate a load or circuit

For main isolation, service switching, or feeder isolation in switchboards and distribution panels. Rated for switching under load.

S5 or S6 switch-disconnector

View switch-disconnectors →

Manual changeover

I need manual switching between two sources

Generator backup boards, bypass switching, and utility-to-utility changeover. I–0–II operation with break-before-make action.

S5F or CCF/CCP changeover switch

View manual changeover →

Automatic transfer

I need automatic failover to backup power

Hospitals, data centres, and critical facilities where power continuity cannot rely on manual operation. Auto source monitoring and transfer.

C2 ATS automatic transfer switch

View ATS range →

Compact isolation

I need a compact DIN-rail isolator for a sub-board

Space-constrained distribution boards and compact panels. DIN-rail and base-mount load break switches from 16A.

S3 compact switch

View S3 range →

Motor control

I need a rotary cam switch for motor or metering circuits

Voltmeter / ammeter switching, motor direction control, and selector applications. Rotary cam action, 20A–63A.

T series cam switch

View T series →

Not sure?

I'm not sure which series I need

Our Product Application Consultants can specify the right Telergon product for your application — including certification requirements, pole configuration, and Icw ratings.

Talk to a PAC — no obligation

Contact a PAC →

Product range

Five series. Every switching requirement covered.

All series stocked in Australia and available with full technical documentation, wiring diagrams, and PAC support.

S5 · Switch-disconnector

S5 — the core isolation switch

For main isolation, service switching and feeder protection in switchboards and distribution panels — rated for on-load switching with high short-circuit withstand, 40 A to 6300 A. The most widely specified Telergon product and the default starting point for most isolation duties.

40A – 6300A Up to 50 kA Icw (1s) 3P / 3P+N / 4P IEC/EN 60947-3 · 690V AC

Shop S5 range →

S6 · Switch-disconnector

S6 — heavy-duty frame

For high-current isolation where Icw performance is the critical spec — BESS, UPS, data centres and utility substations. Industry-leading fault ratings in a compact footprint, 1250 A to 3150 A. (Lower current? The S5 covers most boards.)

1250A – 3150A 50–60 kA Icw (1s) 3P / 4P IEC/EN 60947-3

Shop S6 range →

S5F · Manual changeover

S5F — widest changeover range

For manual I–0–II changeover on generator backup boards, bypass panels and critical load switching. Heavy-duty, with advanced switched neutral and motorisation-ready, 125 A to 3150 A. The widest changeover range.

125A – 3150A Up to 50 kA Icw Switched neutral Motorisation ready

Shop S5F range →

CCF/CCP · Manual changeover

CCF/CCP — mid-range changeover

For everyday generator-backup changeover on standard commercial distribution boards — a practical, cost-effective choice, 200 A to 1250 A, 8,000 cycles. (Heavier duty or switched neutral? Step up to the S5F.)

200A – 1250A Up to 25 kA Icw 8,000 cycles IEC/EN 60947-3

Shop CCF/CCP range →

C2 ATS · Automatic transfer

C2 ATS — automatic transfer

For automatic failover where power continuity can't rely on manual operation — hospitals, data centres and emergency services. Monitors both supplies and transfers automatically on failure, with LCD programming, RS485 and BMS integration, 63 A to 630 A.

63 A – 630 A LCD · RS485 / BMS Auto retransfer IEC/EN 60947-6-1

Shop C2 ATS range →

Supporting ranges

Application	Series	Current	Key features
Compact isolation	S3	16A – 125A	DIN-rail and base-mount load break switches for distribution boards	Shop S3 range ›
Cam switches	T series	20A – 63A	Rotary cam switches for motor control, voltmeter/ammeter and selector applications	Shop T Series range ›

Why Telergon via TROPAC

European engineering. Australian support.

Telergon has manufactured low-voltage switching equipment in Spain for over 70 years. The product is IEC/EN certified, well-proven in European and export markets, and now stocked locally in Australia by TROPAC.

The difference with TROPAC isn't just the local stock — it's the technical capability behind it. Our Product Application Consultants can help you select the correct series, confirm pole configuration, check Icw requirements, and advise on compliance for AS/NZS-governed installations.

We don't just supply product — we support its correct application.

Browse the range Talk to a PAC

70+

Years manufacturing low-voltage switchgear

6300A

Maximum current rating — S5 series

60kA

Short-time withstand, S6 (1 second)

Series stocked in AU — all available now

Ready to specify?

Telergon switchgear. In stock. Supported locally.

Browse the full range online, or contact a TROPAC Product Application Consultant for selection advice, compliance guidance, and trade account pricing.

Shop all Telergon Talk to a PAC

Talk to a specialist

Need help specifying?

Send the team your application and a TROPAC Product Application Consultant will come back with the right Telergon product, stock position and account pricing — usually same business day.

Selection & cross-reference from your current part numbers
Live stock check across QLD, NSW & VIC
Trade-account & project pricing